SunE BWESC V2

Dimensions and data:

SunE BWESC V2 board: 160 x 65 x 23mm (with water cooling approx. 35mm)
Input voltage: up to 80 volts (18S)
Phase current: up to 400 A
Batteriestrom: bis 280 A (95% Duty)
Cooling required at the bottom by thermal pad on heat sink (active or passive)
VESC®* compatible, based on VESC Firmware 6.2

Connections:

Power supply screw-bar with M4 connectors
Phases screwable with M4
2x ADC
2x CAN
2x Serial
1x PPM
1x Hall 10 kOhm pullup to 3.3V no filters
1x Motor Temp
1x USB-C (no 5V supply)
1x 5V 1000mA
1x 3,3V 1000 mA
2.0mm PH connector

Optional:

ESP32 with licensed Voyagesystems.eu software in conjunction with the Metr app (App Store + Google Play)
GPS in connection with voyagesystems.eu module

Features:

3x Mosfet Temp Sensor
Phase filter
VESC® Software
VESC-BMS capable
Motor current. Battery power and power adjustable from each other, thus full acceleration from a standstill without exceeding the maximum permissible power
Speed limit
Low voltage limit as a soft and hard cutoff
Field weakening
MTPA

Datasheet

The BWESC runs the popular VESC®*-Project firmware by Benjamin Vedder.
* VESC is a registered TM, owned by Benjamin Vedder

Important NOTE:
All BWESCs are 100% tested before delivery and have received a test configuration and an engine run. The test configuration is retained upon delivery. Any changes, adjustments, short circuits, solder bridges, insufficient cooling, incompatible updates, incorrect operation of the VESC tool, etc. are carried out entirely at your own risk and are excluded from any warranty and product liability. By purchasing you expressly agree.