Dimensions and data:
BWESC V5 Platine: 35 x 103 x 13mmInput Voltage: up to 80 Volts (19S)
Phase current: up to 220 A
Battery current: up to 150 A
Cooling required at the bottom by thermal pad on heat sink (active or passive)
Compatible with VESC®* Software, based on Firmware 6.2
Connections:
Power supply screw-bar with M4 connectors
Phase screwable with M4 or optional to solder (please choose)
Solder Pads für 2x ADC, Serial, 3x Hall, SPI, I2C, 5V, 3.3V, CAN, PPM, Motor Temperature Sensor
1x CAN
1x USB-C
Optional:
ESP32 with licensed Voyagesystems.eu software in conjunction with the Metr app (App Store + Google Play)
GPS in conjunction with Metr module
Features:
3x Mosfet Temp Sensor
Phase filter
VESC® Software
VESC-BMS capable
Motor current. Battery power and power adjustable from each other, thus full acceleration from a standstill without exceeding the maximum permissible power
Speed limit
Low voltage limit as a soft and hard cutoff
Field weakening
MTPA
data sheet
The HarryM BWESC runs the popular VESC®*-Project firmware by Benjamin Vedder.
* VESC is a registered TM, owned by Benjamin Vedder
Important note:
All BWESCs are 100% tested before delivery and have been given a test configuration and a motor run. The test configuration is retained on delivery. Any changes, adjustments, short circuits, solder bridges, insufficient cooling, incompatible updates, incorrect operation with the VESC tool, etc. are exclusively at your own risk and are excluded from any warranty and product liability. With the purchase you expressly agree.
